Dear Friends,
We hae installed SAP MaxDB 7.7.028 on Windows 2003 x86 server. Under Services.msc, I see the following services...
MAXDB: .M770428
MAXDB: .M770428 (SLOW)
MAXDB: .M770609
MAXDB: .UMDB
MAXDB: .SDB Started
MAXDB: .SDB (SLOW)
What exactly are these services and what is the differenece between a SLOW service and a regular service?
Thank you,
Nikee
Hello Folks,
We have SAP system running on Max DB database. We have windows patching maintenance for that we have to stop SAP and Max DB database.
I am new to Max DB so can someone tell me the correct steps for stopping the database (including the service stopping sequence) and starting it again after the maintenance gets over.
We have two Max DB services running MAXDB: SID and XServer.
I checked on some document that states that taking max DB instance offline from Database manager is not a good idea.
Regards,
Mohit
Hi All,
We have need to reset the SAP* password because SAP* (also DDIC) is locked on client 000 and we don't have any other user. We are on MAXDB (we have also SQL Studio) so we have the error "table unknown" when we try to excute the statement SELECT * FROM USR02 or SELECT * FROM SAPECP.USR02, where SAPECP is the owner. Obviously we want to excute the statement DELETE FROM USR02 WHERE BNAME='SAP*' AND MANDT='000'.
How can we proceed on MAXDB?
Reagards
Bob
Hello out there!
I'm installing a SAP mini on my virtual Win Server 2008 R2. Installation process has been sucessful but now I'm not sure how I can move on. I've installed the MaxDB database manager and now I want to connect to the NSP database.
The instruction says:
Click on Add <- I did
Click on Add on the pop-up window <- I did
Normally now the local server and the NSP database instance should be display. But in my case there is no NSP instance display.
For that reason also no entry for the NSP database is added to the main window.
What can I do to connect to the database? What have I done wrong?
Hi,
I installed Database Studio 7.9.08.11 on a Windows PC. I have Maxdb 7.6 installed on a AIX server used for Content Server purpose. Is it possible to use Windows Database Studio to manage the Maxdb database on Unix?
When I start up Database Studio and try to add a new server for the Maxdb database, I got an error saying:
User management exception: Cannot connect to host DPSDCONT01:7210 [Connection refused: connect], -813.
Can someone help?
Rdgs,
Lim
Hi ,
I'm facing issue in starting maxdb.i have stopped hanged sap sessions .when i try to start i'm getting below errors.
51> dbmcli -d IAC -u control,control db_online
ERR
-24994,ERR_RTE: Runtime environment error
20090,Check kernel message file! Kernel exited with '1' before reaching ADMIN state
The database is in state "offline", but resources were found: pid file found but no watchdog process
sderums6306:iacadm 51> dbmcli -d IAC -u control,control show state
OK
Missing root pointer in memory mapping when restoring memory map from /sapdb/IAC/data/wrk/IAC/rtedump_dir
enclosed startsap trc file
Please suggest i havent got any solution after browsing many hours .
Thanks&Regards
Ravi
Hi,
I had taken MaxDB online database backup through Data Protector 6.11. Now i want to restore this backup on other server. So that i can configure this as a standby database. I selected config and data for restoration but it was giving me an error as below,
[Critical] From: OB2BAR_SAPDBBAR@ttcsolma "BE1" Time: 01/11/11 01:19:05
Error: SAPDB responded with: -24988,ERR_SQL: SQL error
-9407,System error: unexpected error
3,Database state: OFFLINE
Internal errorcode, Error code 9050 "disk_not_accessible"
So I created the database but with default values and then tried restoration but getting error as below,
Error: Unable to read the configuration value `All' for SAPDB instance `SID'.
If anybody is having any document or steps for confguring the Standby MaxDB database through Data Protector backup/restore method.
Thanks,
Narendra
Hello,
we actually hae a content server in version 6.4 based on MaxDB 7.6 and Windows Server 2003. The documents are stored in the database (~900GB)
What we have to do is to adapt the whole landscape, indeed a new Windows Server 2012, CS 6.5 and MaxDB 7.9.
Unfortunately I could not find any convenient solution for my purpose. Which way would you prefer and which was is the practically.
-> Fresh CS 6.5 installation based on Max DB 7.9 on the new Windows Server 2012. Whats next?
An export of the old CS repository and import it to the new CS? or
Restore from a backup of the old MaxDB?
As far as I know the upgrade from CS 6.4 to 6.5 is only replace some dll's, right? (note 514500) But regarding PAM CS 6.5 is not supported on Windows Server 2003, so I can not make an upgrade on the current system.
Should I have to make any pre activities on the current system prior to this?
Thank you for your assitance.
BR
Veysel
Hi
I am doing a system copy of content server from a Win2003 system to a Win2012 system.
These are the steps
Installed cs 6.40 on win2012
backup database on old cs
recovery of database with backup of old system
All runs fine and documents can be accessed from SAP
Now I want to setup dbacockpit.
using user control for dbm connection
usin user sapr3 for sql
The dbm connection is fine, but the sql connection cant be made.
Looked like a user/pw issue, but I am able to logon to database with SAPR3/SAP so the password seems ok.
I tried to connect a system which I just installed and did not do the db recovery on, used CONTROL and SAPR3 and that one got setup OK.
Can I just reset the SAPR3 password to SAP in the maxdb? Do I have to update the password in SAP ERP too somewhere?
Or isnt the user/password not the issue?
Thanks
Sander
Dear Friends,
We hae installed SAP MaxDB 7.7.028 on Windows 2003 x86 server. Under Services.msc, I see the following services...
MAXDB: .M770428
MAXDB: .M770428 (SLOW)
MAXDB: .M770609
MAXDB: .UMDB
MAXDB: .SDB Started
MAXDB: .SDB (SLOW)
What exactly are these services and what is the differenece between a SLOW service and a regular service?
Thank you,
Nikee
HI All
I need to set automatic backup in MaxDB, i have seen automatic option for logs but not for Full database, Can anyone explain how we can do this.
I want Full backup on daily basis along with logs.
Welcome for suggestion and directions.
Regards,
YR
I folks,
I use a 32 bits IDE witch connect to MaxDB using ODBC, so i need the 32 bit driver to create a 32 bits ODBC datasource.
Everything was OK, until ia receive a brand new computer, running... Windows 7 64 bits.
When i try to install MaxDb client (7.6.06.22), i have this message:
Cannot create package tree: unresolved dependency: package "Database connectivity" not found.
I've also tried version 7.8.02.21, and i get another message:
Software isn't runnable on your system.
What must i do ?
TIA
Frédéric.
Hi All,
We have need to reset the SAP* password because SAP* (also DDIC) is locked on client 000 and we don't have any other user. We are on MAXDB (we have also SQL Studio) so we have the error "table unknown" when we try to excute the statement SELECT * FROM USR02 or SELECT * FROM SAPECP.USR02, where SAPECP is the owner. Obviously we want to excute the statement DELETE FROM USR02 WHERE BNAME='SAP*' AND MANDT='000'.
How can we proceed on MAXDB?
Reagards
Bob
Hi Guys,
MaxDB provides the possibility to logically unite several database objects (e.g. Tables, Views, Indexes, ...) in so called "Schemas".
However, I couldn't find any documentation about how to connect to a certain schema via JDBC. How should the JDBC URL look like? Assuming I have this kind of URL jdbc:sapdb://localhost:7200/MAXDB. Is there a way to connect to the schema "DEMO"?
Thanks for the help.
Cheers,
Gerardo
Hello Experts,
I have my MaxDB installed and can can someone share the steps to take for taking backup/restore the SAP Database. from database studio...
We had a basis admin who was taking the backup ,but now he is away so I have do do it. I am able to login to database studio after that what shoul I do
dB version:SAP MAX DB 7.9
Thanks
Karthik
Hello,
I have a problem in connection between SAP and its database (MaxDB 7.9). When I check using DB59 -> Connection Test -> Connection Test, the check result was error. Here is the log:
Application Server: prodbap_BAP_30 ( SunOS )
1. Connect. test with "dbmcli db_state" Unsuccessful
dbmcli_command_execute_error
Error! Connection failed to node prodbap for database BAP:
tp error: connect failed
External program terminated with exit code 2
2. Connect. test with command mode "dbmrfc db_state" Unsuccessful
dbm_system_error
Name and Server : BAP - prodbap
DBMRFC Function : DBM_EXECUTE
Command : db_state
Error : DBM Error
Return Code : -11
Error Message : tp error: connect failed#
3. Connect. test with session mode "dbmrfc db_state" Unsuccessful
dbm_system_error
Name and Server : BAP - prodbap
DBMRFC Function : DBM_CONNECT
Error : DBM Error
Return Code : -11
Error Message : tp error: connect failed#
The SAP are unable to get the database state through the db_state command. When I check using dbmcli, I was succesfully get the database state. Here is the result:
dbmcli -d BAP
dbmcli on BAP>user_logon SUPERDBA,<pwd>
OK
---
dbmcli on BAP>db_state
OK
State
ONLINE
---
I already check on KnlMsg but couldn't find any error on that log. I think that this issue is only about connecting the SAP and database but I have no idea what should I adjust.
Thanks for your help,
Kris
Hi All ,
I am trying to install SAP trial version . While installation of MAXDB serve , I am getting an error " Some database application might still be running"
I dont have any other database installed on my system .
Kindly reply what can be the possible reason for this .
Thanks n Regards
Manik L Dhakate
Hi,
I am new to MAXDB and installed SAP system on Windows XP on local machine.
I have installed SAP Netweaver and while connecting to MAXDB via MAXDB Database Manager facing issue.
I am getting error as -2 ERR_USRFAIL:User authorization failed. Please check attached screenshot for more details.
I tried to connect via credentials provided in this thread http://scn.sap.com/thread/95219 but failed to do so.
I used following ports for connection:
7200
7210
7269
7270
7575
Can anyone provide port, default username and password.?
Feedback appreciated.
Hi all,
I want to load the system tables on Maxdb 7.6.05_15.
using dbmcli -d xxx -u control,<passwd>l load_systab -u superdba,<passwd> -ud domain
and I get
-24907,ERR_DBAWRONG: wrong SYSDBA
an sql_execute select * from users shows
OK
END
'CONTROL';'';'CONTROL';'ADMIN';'MULTIPLE';(null);(null);(null);'DEFAULT';'20070208';'00101102';'20070208';'00101102';'20070208';'00101102';'XXX';'host';0;'NO';(null)
'SUPERDBA';'';'DBSERVICE';'DBA';'MULTIPLE';(null);(null);(null);'DEFAULT';'20070208';'00101249';'20070208';'00101249';'20070208';'00101249';'XXX';'host';6;'YES';(null)
'SUPERDBA';'';'SUPERDBA';'SYSDBA';'MULTIPLE';(null);(null);(null);'DEFAULT';'20051105';'00140111';'20090218';'00170520';'20060117';'00113906';'XXX';'host';10;'NO';(null)
So the user superdba should be ok to use.
Does anbody have an idea how to fix this?
Thank you.
Best regards
Christian
Dear Friends,
We hae installed SAP MaxDB 7.7.028 on Windows 2003 x86 server. Under Services.msc, I see the following services...
MAXDB: .M770428
MAXDB: .M770428 (SLOW)
MAXDB: .M770609
MAXDB: .UMDB
MAXDB: .SDB Started
MAXDB: .SDB (SLOW)
What exactly are these services and what is the differenece between a SLOW service and a regular service?
Thank you,
Nikee