RHEL3update4 - 2.4 kernel in VM.

MaxDB 7.5.0.55

SAP Ent. 4.7 (6.40)

For the life of me I can't figure this out.  Installed a system and restored from backup, the SAP system (4.7) runs for almost exactly 11 days and then crashes.  In the knldiag.err file I get the message "T(some task #) Bad Resume Count Detected:138 (usually over 100)"  I've tried upgrading the build to 55 for 7.5, with the same results. Only the DB crashes and not the SAP instance. The stack back trace seems to reference it being a kernel issue but I cannot seem to see what's going on.

I did see an SAP Note about this: http://maxdb.sap.com/webpts?wptsdetail=yes&ErrorType=0&ErrorID=1141905

It seems as though it might have to do with savepoints in the system, but I'm not sure where to begin regarding that. Maybe it's a parameter change I have to make?

We are unable to upgrade MaxDB any further due to lack of support contract and the legacy system of which this is installed. It should be worth noting I have a current system that's got the same CPU/Memory setup and I've tried to equalize the parameters to match but for some reason this *new one seems to crash where the other does not. Lastly, these are all running in VMs.

Help help is GREATLY appreciated (I know the setup is antiquated).

Chris

Hi,

I have installed SAP Netweaver developer Studio 6.40 which installed MAXDB database also. Due to some reason I had to unistall the trial version of Developer studio, in this process developer studio got unistalled but not MAXDB.

*----

I use Add/Remove programs and uninstall MaxDB. I get the messages like this.....

Start uninstallation now (y/n) : Y (resoponse)

then message displays

found instance of J2E, cannot remove package..first remove all instances...

*----

I have stopped all the services, even then Iam getting such error message. How do I uninstall?

Help needed.

-Suresh

Hello,

I'm trying to install ECC 6.0 EHP 7 SR1 with the most up to date SWMP on Windows with MaxDB.

At the step "Install Instance basics of ASCS01" the system raises the following error

"There is not enogh available space in 'F:/'. There are 143118 MB available. The required space is 230400 MB."

F:\ is the future backup partition, so I didn't put anything there.

My question: Where does the vale 230400 MB come from? Do I have a chance to change it during the installation?

Your help is very much appreciated.

Hello,

For a MaxDB system, the cache_size parameter was changed depending upon the hardware. Later, the hardware was moved to a small box due to a db crash and then we have observed that the parameter got changed to a new value.

As far as the time stamp show, it got changed during the DB restart.

Please let me know if the MaxDB system automatically changes the parameter.

Thanks a lot in advance!

Regards,

Ankit

Hi experts,

I need to install on our Solution Manager Host (HP-UX ia64) the MaxDB/LiveCache host, as I want to connect the DB of a SAP-System to DBACOCKPIT/Technical Monitoring.

Does somebody know, where I can find this software?

Thank you

Hi gurues, I'm facing this issue with an IDES on MaxDB with Windows.

System was up and running until someone tries to make an upgrade of the kernel. Since then we can not start our system. we tried to rollback kernel release to the previous one but it didn't work.

When we start our system from MMC console we can see all process in green but work processes are in RUN state and after a few minutes they goes down with the following error

-

trc file: "dev_w0", trc level: 1, release: "701"

-

*

• ACTIVE TRACE LEVEL           1

• ACTIVE TRACE COMPONENTS      all, MJ

*

B 

B Mon May 16 23:57:31 2011

B  create_con (con_name=R/3)

B  Loading DB library '
sirillium1\sapmnt\SED\SYS\exe\uc\NTAMD64\dbsdbslib.dll' ...

B  Library '
sirillium1\sapmnt\SED\SYS\exe\uc\NTAMD64\dbsdbslib.dll' loaded

B  Version of '
sirillium1\sapmnt\SED\SYS\exe\uc\NTAMD64\dbsdbslib.dll' is "700.08", patchlevel (0.24)

B  New connection 0 created

M sysno      00

M sid        SED

M systemid   562 (PC with Windows NT)

M relno      7010

M patchlevel 0

M patchno    32

M intno      20020600

M make:      multithreaded, Unicode, 64 bit, optimized

M pid        212

M

M  kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)

M  length of sys_adm_ext is 576 bytes

M  ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 212) [dpxxdisp.c   1348]

I  MtxInit: 30000 0 0

M  DpSysAdmExtCreate: ABAP is active

M  DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active

M  DpShMCreate: sizeof(wp_adm)          22784     (1752)

M  DpShMCreate: sizeof(tm_adm)          5912704     (29416)

M  DpShMCreate: sizeof(wp_ca_adm)          24064     (80)

M  DpShMCreate: sizeof(appc_ca_adm)     8000     (80)

M  DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080

M  DpShMCreate: sizeof(comm_adm)          552080     (1088)

M  DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0

M  DpShMCreate: sizeof(slock_adm)          0     (104)

M  DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0

M  DpShMCreate: sizeof(file_adm)          0     (72)

M  DpShMCreate: sizeof(vmc_adm)          0     (1864)

M  DpShMCreate: sizeof(wall_adm)          (41664/36752/64/192)

M  DpShMCreate: sizeof(gw_adm)     48

M  DpShMCreate: SHM_DP_ADM_KEY          (addr: 000000000B2C0050, size: 6607136)

M  DpShMCreate: allocated sys_adm at 000000000B2C0050

M  DpShMCreate: allocated wp_adm at 000000000B2C2270

M  DpShMCreate: allocated tm_adm_list at 000000000B2C7B70

M  DpShMCreate: allocated tm_adm at 000000000B2C7BD0

M  DpShMCreate: allocated wp_ca_adm at 000000000B86B450

M  DpShMCreate: allocated appc_ca_adm at 000000000B871250

M  DpShMCreate: allocated comm_adm at 000000000B873190

M  DpShMCreate: system runs without slock table

M  DpShMCreate: system runs without file table

M  DpShMCreate: allocated vmc_adm_list at 000000000B8F9E20

M  DpShMCreate: allocated gw_adm at 000000000B8F9EA0

M  DpShMCreate: system runs without vmc_adm

M  DpShMCreate: allocated ca_info at 000000000B8F9ED0

M  DpShMCreate: allocated wall_adm at 000000000B8F9EE0

M 

M Mon May 16 23:57:32 2011

M  rdisp/queue_size_check_value :  -> off

M  ThTaskStatus: rdisp/reset_online_during_debug 0

X  EmInit: MmSetImplementation( 2 ).

X  MM global diagnostic options set: 0

X  <ES> client 0 initializing ....

X  Using implementation view

X  <EsNT> Using memory model view.

M  <EsNT> Memory Reset disabled as NT default

X  ES initialized.

M  ThInit: running on host sirillium1

M 

M Mon May 16 23:57:33 2011

M  calling db_connect ...

C 

C  DBSDBSLIB : version 700.08, patch 0.024 (Make PL 0.32)

C  MAXDB shared library (dbsdbslib) patchlevels (last 10)

C    (0.024) Default value for max. input variables is 2000 (note 655018)

C    (0.024) Profile parameter to define max. input variables (note 655018)

C    (0.024) Switch SQLMODE after CREATE INDEX SERIAL (note 1267841)

C    (0.024) Input parameters for SQL statements increased (note 655018)

C    (0.018) Create index serial for MaxDB 7.6 (note 1267841)

C    (0.018) More trace in case of packed to string conversion error (note 1262799)

C    (0.016) R3trans export aborts with signal 6 (note 1262245)

C    (0.009) IA64 alignment errors (note 1245982)

C    (0.007) Support DB-Type 'SAP DB' by UPDSTAT (note 1225668)

C 

C 

C  Loading SQLDBC client runtime ...

C  SQLDBC SDK Version : SQLDBC.H  7.6.0    BUILD 007-123-091-175

C  SQLDBC Library Version : libSQLDBC 7.6.5    BUILD 015-123-202-938

C  SQLDBC client runtime is MaxDB 7.6.5.015 CL 202938

C  SQLDBC supports new DECIMAL interface : 0

C  SQLDBC supports VARIABLE INPUT data   : 1

C  SQLDBC supports keepAlive indicator   : 0

C  INFO : SQLOPT= -I 0 -t 0 -S SAPR3

C  Try to connect (DEFAULT) on connection 0 ...

C  *** ERROR => Connect to database failed, rc = -10709 (Connection failed (RTE:Database name is missing))

[dbsdbsql.cpp 137]

B  ***LOG BV3=> severe db error -10709    ; work process is stopped [dbsh#2 @ 1203] [dbsh    1203 ]

B  ***LOG BY2=> sql error -10709 performing CON [dblink#3 @ 431] [dblink  0431 ]

B  ***LOG BY0=> Connection failed (RTE:Database name is missing) [dblink#3 @ 431] [dblink  0431 ]

M  ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c   1449]

M  in_ThErrHandle: 1

M  *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10563]

M 

M  Info for wp 0

M 

M    pid = 212

M    severity = 0

M    status = 0

M    stat = WP_RUN

M    waiting_for = NO_WAITING

M    reqtype = DP_RQ_DIAWP

M    act_reqtype = NO_REQTYPE

M    rq_info = 0

M    tid = -1

M    mode = 255

M    len = -1

M    rq_id = 65535

M    rq_source =

M    last_tid = 0

M    last_mode = 0

M    semaphore = 0

M    act_cs_count = 0

M    csTrack = 0

M    csTrackRwExcl = 0

M    csTrackRwShrd = 0

M    mode_cleaned_counter = 0

M    control_flag = 0

M    int_checked_resource(RFC) = 0

M    ext_checked_resource(RFC) = 0

M    int_checked_resource(HTTP) = 0

M    ext_checked_resource(HTTP) = 0

M    report = >                                        <

M    action = 0

M    tab_name = >                              <

M    attachedVm = no VM

M 

M  *****************************************************************************

M  *

M  *  LOCATION    SAP-Server sirillium1_SED_00 on host sirillium1 (wp 0)

M  *  ERROR       ThInit: db_connect

M  *

M  *  TIME        Mon May 16 23:57:33 2011

M  *  RELEASE     701

M  *  COMPONENT   Taskhandler

M  *  VERSION     1

M  *  RC          13

M  *  MODULE      thxxhead.c

M  *  LINE        10783

M  *  COUNTER     1

M  *

M  *****************************************************************************

M 

M  PfStatDisconnect: disconnect statistics

M  Entering TH_CALLHOOKS

M  ThCallHooks: call hook >BtcCallLgCl< for event BEFORE_DUMP

M  ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP

M  *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   723]

M  *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c  261]

M  Entering ThSetStatError

M  ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)

M  Entering ThReadDetachMode

M  call ThrShutDown (1)...

M  ***LOG Q02=> wp_halt, WPStop (Workproc 0 212) [dpnttool.c   334]

We check several entries on this SDN site, and look for a lot of notes on the marketplace, and they always are related to default user in xuser files, but our xuser list output is ok. We have a DEFAULT connection to SAPSID user, a DBM connection to CONTROL user and a USERDBA connection.

-

XUSER Entry  1

-

Key         :DEFAULT          

Username    :SAPSID                                                         

UsernameUCS2:S.A.P.S.E.D. . . . . . . . . . . . . . . . . . . . . . . . . . .

Password    :?????????

PasswordUCS2:?????????

Dbname      :SID              

Nodename    :server1                                                     

Sqlmode     :SAPR3  

Cachelimit  :-1

Timeout    

Isolation  

Charset     :<unspecified>    

-

XUSER Entry  2

-

Key         :c                

Username    :CONTROL                                                        

UsernameUCS2:C.O.N.T.R.O.L. . . . . . . . . . . . . . . . . . . . . . . . . .

Password    :?????????

PasswordUCS2:?????????

Dbname      :SID              

Nodename    :server1                                                     

Sqlmode     :INTERNAL

Cachelimit  :-1

Timeout     :-1

Isolation   :-1

Charset     :<unspecified>    

-

XUSER Entry  3

-

Key         :c_J2EE           

Username    :CONTROL                                                        

UsernameUCS2:C.O.N.T.R.O.L. . . . . . . . . . . . . . . . . . . . . . . . . .

Password    :?????????

PasswordUCS2:?????????

Dbname      :SID              

Nodename    :server1                                                     

Sqlmode     :SAPR3  

Cachelimit  :-1

Timeout    

Isolation  

Charset     :<unspecified>    

-

XUSER Entry  4

-

Key         :w                

Username    :SUPERDBA                                                       

UsernameUCS2:S.U.P.E.R.D.B.A. . . . . . . . . . . . . . . . . . . . . . . . .

Password    :?????????

PasswordUCS2:?????????

Dbname      :SID              

Nodename    :server1                                                     

Sqlmode     :INTERNAL

Cachelimit  :-1

Timeout     :-1

Isolation   :-1

Charset     :<unspecified>    

Any idea? we are out of ideas at this moment.

Regards

Edited by: Gustavo Goicochea on May 17, 2011 6:37 PM

Hello All,

We are running SCM 5.0 on Wintel, livecache version is 7.6 (KERNEL 7.6.02  BUILD 014-123-152-175).

The following short dumps are logged on the test instance. Consistancy checks of livecache have been successful.

Runtime Errors         DBIF_DSQL2_SQL_ERROR

Exception              CX_SY_NATIVE_SQL_ERROR

Short text

    An SQL error occurred when executing Native SQL.

What happened?

    The error 600 occurred in the current database connection "LCA".

How to correct the error

    Database error text........: "POS(1) Work rolled back: BAD_ALLOCATION in

     SAPTS_AGGMULT"

    Database error code........: 600

    Triggering SQL statement...: "EXECUTE PROCEDURE SAPTS_AGGMULT_TIMESERIES"

    Internal call code.........: "[DBDS/NEW DSQL]"

    Please check the entries in the system log (Transaction SM21).

C Mon Aug 04 11:45:07 2008

C  *** ERROR =>   execute() of C_0752, #rec=0, rc=1, rcSQL=600 (POS(1) Work rolled back: BAD_ALLOCATION in SAPTS_AGGMULT)

[dbsdbsql.cpp 1570]

C  *** ERROR => EXECUTE on connection 1, rc=600 (POS(1) Work rolled back: BAD_ALLOCATION in SAPTS_AGGMULT)

[dbdssdb.cpp  2173]

C  sc_p=000000002ABF1DD0,no=752,idc_p=0000000000000000,con=1,act=1,slen=64,smax=256,#vars=0,stmt=000000002B007A30,table=      SAP

C  CALL USER.SAPTS_AGGMULT_TIMESERIES ( ?, ?, ?, ?, ?, ?, ?, ?, ? );

C  *** ERROR => dbdssdb: SQL Error 600, Message: POS(1) Work rolled back: BAD_ALLOCATION in SAPTS_AGGMULT

[dbdssdb.cpp  2403]

B  ***LOG BY2=> sql error 600        performing EXE        [dbds#1 @ 364] [dbds    0364 ]

B  ***LOG BY0=> POS(1) Work rolled back: BAD_ALLOCATION in SAPTS_AGGMULT [dbds#1 @ 364] [dbds    0364 ]

A  TH VERBOSE LEVEL FULL

All assistance will be useful.

Best Regards,

Nisch

HI Guys ,

I am trying to reset SAP* password in my MAXDB DB 7.6.  I know that is a very simple operation and I did it many times in other DBs , but here I  have stuck  during whole day .

I have connected to SQL Studio as SUPERDBA .

My SAP Schema  is "SAPIDS" .

To access usr02 table I run the following SQL :

select MANDT, BNAME, UFLAG from SAPIDS.USR02 where MANDT='000' and BNAME='SAP*'

, but I got the error thet the table does not exist .

I also tried:

select MANDT, BNAME, UFLAG from "SAPIDS"."USR02" where MANDT='000' and BNAME='SAP* ,

select * from SAPIDS.USR02 ; select * from "SAPIDS"."USR02" ;

I switch to Oracle mode also , but Nothing is working !

Also important to say that sql :

select * from tables where owner='SAPIDS'and tablename='USR02'

shows the USR02 table as well .

Any ideas ?

thanks in advance,

Evgeny

I am installing SAP ERP 6.0 with MaxDB on a Linux system.

The installation document says the minimum size of SAP data is 70 GB.

But while installing the minimum Data size is showing as 240000 MB (240 GB).

On what parameter/system attribute this value of "Minimum data size" depends?

If possible how can we change this value?

Hi guru,

Recently we are facing some backup issues with backup tool COMMVAULT backing up database MAXDB. This problem is really strange as it happens intermittent. Below is the log that i found and suspect it could be due to security issue. Has any one face such problem before? Really appreciate your help. Thank you.

2010-01-05 10:20:05 0x00002328              0 DBM      command backup_start BackLog LOG AUTOIGNORE

2010-01-05 10:20:06 0x00002328 ERR     -24920 DBM      ERR_BACKUPOP: backup operation was unsuccessful

                    0x00002328 ERR     -24920 DBM      The database was unable to fulfill a request (-903, Host file I/O error,access denied [5]).

2010-01-05 14:00:05 0x000033bc              0 DBM      command backup_start BackPages1 RECOVERY PAGES AUTOIGNORE

2010-01-06 10:20:05 0x000010e4              0 DBM      command backup_start BackLog LOG AUTOIGNORE

2010-01-06 10:20:59 0x000010e4 ERR     -24920 DBM      ERR_BACKUPOP: backup operation was unsuccessful

                    0x000010e4 ERR     -24920 DBM      The database was unable to fulfill a request (-903, Host file I/O error,access denied [5]).

2010-01-06 14:00:04 0x000014a4              0 DBM      command backup_start BackPages1 RECOVERY PAGES AUTOIGNORE

2010-01-07 10:20:04 0x00000720              0 DBM      command backup_start BackLog LOG AUTOIGNORE

2010-01-07 10:20:52 0x00000720 ERR     -24920 DBM      ERR_BACKUPOP: backup operation was unsuccessful

                    0x00000720 ERR     -24920 DBM      The database was unable to fulfill a request (-903, Host file I/O error,access denied [5]).

Regards,

Kent

Hi,

I installed MaxDB Studio 7.9.0.8 on my PC, but I cannot connect to any server or database.

Any suggestions how this can be solved ?

Thanks,

Werner

Hello,

i have installed a new ERP 6.06 SAP System on MaxDB 7.9/Sles 11 Linux. After successful installation i have tested the database connection.

The database connection failed. What could i do to solve the problem?

SAP transaction DB59 Test:

Result:

p01_P01_02 (p01 )

SAP Kernel Release : 720_EXT_REL

SAP Kernel Patch : 401

DBMRFC Release : 7.9.07.14

DBMCLI Release : 7.9.07.14

DBSL Release : 720.00

DBSL Patch : 421

SQLDBC Version : 7.8.02.17

SQLDBC Runtime : 7.9.07.14

1.DBSL Library Availability -Connection test successful

2.Client Software Availability -Connection test successful

3.Execute an external operating system command (DBMCLI) -Connection test successful

4.Determine status using SQL connection -Error in connection test

5.Test the SQL connection (Native SQL at CON_NAME) -Connection test successful

Report: RSSDBCHECKDBMRFC

  Main Analysis

       SMGW - Checking existence and correctness of registered client

       WARNING: dbmrfc@sapdb not registered. Trying to start the SAPDB_DBM_DAEMON

       SM59 - Checking existence and connection of RFC destinations SAPDB_DBM and SAPDB_DBM_DAEMON

       SAPDB_DBM exists

       SAPDB_DBM_DAEMON exists

       SAPDB_DBM connection successful

       WARNING: SAPDB_DBM_DAEMON connection not successful. Trying to start SAPDB_DBM_DAEMON

       SM59 - Checks were successful

       CONN - Determining database state via TCP/IP connection SAPDB_DBM and SAPDB_DBM_DAEMON

  DBM_EXECUTE_SDB error: dbm_execute_error

  Name and Server     : P01 - p01

  Function            : DBM_EXECUTE

  Command             : db_state

  Error               : DBM Error

  Return Code         : -24941

  Error Message       : ERR_NEEDLOGON: DBM server logon required

  ERR

  -24941,ERR_NEEDLOGON: DBM server logon required

       ERROR: Error in determination via command mode "dbmrfc db_state"

  DBM_EXECUTE_SDB: dbm_execute_error

  Name and Server     : P01 - p01

  Function            : DBM_EXECUTE

  Command             : db_state

  Error               : DBM Error

  Return Code         : -24941

  Error Message       : ERR_NEEDLOGON: DBM server logon required

  ERR

  -24941,ERR_NEEDLOGON: DBM server logon required

       ERROR: Error in determination via session mode "dbmrfc db_state"

       CONN - Check was not successful

       TP - Get connection information and existence of program

       Connection information used by DBMRFC:

       dbnode: p01 ; dbname: P01 ; sysid: P01 ; conn: P01 ; profile: no_longer_used

       Transport profile is not specified, trying to determine it

       ERROR in TMS_CFG_READ_LOCAL_CONFIG:  tms_is_not_configured

       ERROR in TMS_CFG_READ_LOCAL_CONFIG: Could not get transport domain.

       Executing command: dbmcli -d P01 -n p01 -tpp no_longer_used -tpi P01 -tpc P01 db_state

       TP - Checks were successful

Detail Analysis

       Checking MAXDB Version and searching independent program path via SDBREGVIEW

       Independent program path exists: /sapdb/programs

       Client installation path exists: /sapdb/clients/P01

       Checking paths in environment variables

       Checking correctness of environment variable "path"

       /sapdb/programs/bin  exists

       ERROR: Set the following path before all other paths in environment variable: /sapdb/clients/P01/bin

       /usr/sap/P01/DVEBMGS02/exe (DIR_EXECUTABLE) exists

       Checking correctness of environment variable "ld_library_path"

       /usr/sap/P01/DVEBMGS02/exe (DIR_EXECUTABLE) exists

       ERROR: Set the following path before all other paths in environment variable: /sapdb/programs/lib

       ERROR: Set the following path before all other paths in environment variable: /sapdb/clients/P01/lib

       Error found in one step

       Checking existence of necessary libraries in /sapdb/programs/lib

       libicudata.so.<version> exists

       libicui18n.so.<version> exists

       libicuuc.so.<version> exists

       libsapni.so exists

       WARNING: libsapu16.so was not found

       Check your MAXDB installation

       Checking existence of necessary executables

       tp exists in /usr/sap/P01/DVEBMGS02/exe

       sapdbmrfc exists in /usr/sap/P01/DVEBMGS02/exe

       dbmrfc exists in /sapdb/programs/bin

       sdbregview exists in /sapdb/programs/bin

       sdbverify exists in /sapdb/programs/bin

       dbmcli exists in /sapdb/programs/bin

Xuser test on OS:

p01:p01adm 57> dbmcli -U c

dbmcli on p01 : P01>exit

OK

---

p01:p01adm 58> dbmcli -U w

dbmcli on p01 : P01>exit

OK

---

p01:p01adm 59> dbmcli -d P01 -u control,<password>

dbmcli on P01>exit

OK

---

p01:p01adm 59> dbmcli -d P01 -u superdba,<password>

dbmcli on P01>exit

OK

---

p01:p01adm 61> R3trans -d

This is R3trans version 6.23 (release 720 - 31.10.12 - 20:12:06).

unicode enabled version

R3trans finished (0000).

p01:p01adm 62> R3trans -x

This is R3trans version 6.23 (release 720 - 31.10.12 - 20:12:06).

unicode enabled version

R3trans finished (0000).

p01:p01adm 63>

p01:p01adm 58> dbmcli -d P01 -U c db_enum

OK

P01     /sapdb/P01/db                           7.9.07.14       fast    running

P01     /sapdb/P01/db                           7.9.07.14       quick   offline

P01     /sapdb/P01/db                           7.9.07.14       slow    offline

P01     /sapdb/P01/db                           7.9.07.14       test    offline

p01:p01adm 59>

p01:p01adm 60> x_server start

2013-10-19 12:17:28 30139 44640 INF  12916          Found running XServer on port 7200

2013-10-19 12:17:28 30139 44640 INF  13011            version 'U64/LIX86 7.9.07   Build 014-123-244-287'

2013-10-19 12:17:28 30139 44640 INF  13010            installation P01  - path: /sapdb/P01/db

2013-10-19 12:17:28 30141 86336 ERR  11931 XSERVER  Open update pipe '/sapdb/data/fifo/xserver_p01_update' failed:No such file or directory

2013-10-19 12:17:28 30141 86336 INF  12916          Found running sdbgloballistener on port 7210

2013-10-19 12:17:28 30141 86336 INF  13011            version 'UNKNOWN'

2013-10-19 12:17:28 30141 86336 ERR  11941 XSERVER  Version string conversion failed:expected format %-9.9s %-8.8s Build %-3.3s-%-11.11s

p01:p01adm 60>

p01:p01adm 60> cd /sapdb/data/fifo/

p01:p01adm 61> ls -altr

total 8

drwxrwxr-x 12 sdb sdba 4096 Oct 18 18:30 ..

prw-rw----  1 sdb sdba    0 Oct 19 12:05 xserver_p01_7200_logger

prw--w--w-  1 sdb sdba    0 Oct 19 12:05 P01

prw-rw----  1 sdb sdba    0 Oct 19 12:17 xserver_p01_7200_update

drwxrwxr-x  2 sdb sdba 4096 Oct 19 12:17 .

p01:p01adm 62>

There´s no entry with "xserver_p01_update"

How can i create this entry?

I have no idea to solved this problem. Who can help?

Best regards

Dennis

Hi gurues, I'm facing this issue with an IDES on MaxDB with Windows.

System was up and running until someone tries to make an upgrade of the kernel. Since then we can not start our system. we tried to rollback kernel release to the previous one but it didn't work.

When we start our system from MMC console we can see all process in green but work processes are in RUN state and after a few minutes they goes down with the following error

-

trc file: "dev_w0", trc level: 1, release: "701"

-

*

• ACTIVE TRACE LEVEL           1

• ACTIVE TRACE COMPONENTS      all, MJ

*

B 

B Mon May 16 23:57:31 2011

B  create_con (con_name=R/3)

B  Loading DB library '
sirillium1\sapmnt\SED\SYS\exe\uc\NTAMD64\dbsdbslib.dll' ...

B  Library '
sirillium1\sapmnt\SED\SYS\exe\uc\NTAMD64\dbsdbslib.dll' loaded

B  Version of '
sirillium1\sapmnt\SED\SYS\exe\uc\NTAMD64\dbsdbslib.dll' is "700.08", patchlevel (0.24)

B  New connection 0 created

M sysno      00

M sid        SED

M systemid   562 (PC with Windows NT)

M relno      7010

M patchlevel 0

M patchno    32

M intno      20020600

M make:      multithreaded, Unicode, 64 bit, optimized

M pid        212

M

M  kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)

M  length of sys_adm_ext is 576 bytes

M  ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 212) [dpxxdisp.c   1348]

I  MtxInit: 30000 0 0

M  DpSysAdmExtCreate: ABAP is active

M  DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active

M  DpShMCreate: sizeof(wp_adm)          22784     (1752)

M  DpShMCreate: sizeof(tm_adm)          5912704     (29416)

M  DpShMCreate: sizeof(wp_ca_adm)          24064     (80)

M  DpShMCreate: sizeof(appc_ca_adm)     8000     (80)

M  DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080

M  DpShMCreate: sizeof(comm_adm)          552080     (1088)

M  DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0

M  DpShMCreate: sizeof(slock_adm)          0     (104)

M  DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0

M  DpShMCreate: sizeof(file_adm)          0     (72)

M  DpShMCreate: sizeof(vmc_adm)          0     (1864)

M  DpShMCreate: sizeof(wall_adm)          (41664/36752/64/192)

M  DpShMCreate: sizeof(gw_adm)     48

M  DpShMCreate: SHM_DP_ADM_KEY          (addr: 000000000B2C0050, size: 6607136)

M  DpShMCreate: allocated sys_adm at 000000000B2C0050

M  DpShMCreate: allocated wp_adm at 000000000B2C2270

M  DpShMCreate: allocated tm_adm_list at 000000000B2C7B70

M  DpShMCreate: allocated tm_adm at 000000000B2C7BD0

M  DpShMCreate: allocated wp_ca_adm at 000000000B86B450

M  DpShMCreate: allocated appc_ca_adm at 000000000B871250

M  DpShMCreate: allocated comm_adm at 000000000B873190

M  DpShMCreate: system runs without slock table

M  DpShMCreate: system runs without file table

M  DpShMCreate: allocated vmc_adm_list at 000000000B8F9E20

M  DpShMCreate: allocated gw_adm at 000000000B8F9EA0

M  DpShMCreate: system runs without vmc_adm

M  DpShMCreate: allocated ca_info at 000000000B8F9ED0

M  DpShMCreate: allocated wall_adm at 000000000B8F9EE0

M 

M Mon May 16 23:57:32 2011

M  rdisp/queue_size_check_value :  -> off

M  ThTaskStatus: rdisp/reset_online_during_debug 0

X  EmInit: MmSetImplementation( 2 ).

X  MM global diagnostic options set: 0

X  <ES> client 0 initializing ....

X  Using implementation view

X  <EsNT> Using memory model view.

M  <EsNT> Memory Reset disabled as NT default

X  ES initialized.

M  ThInit: running on host sirillium1

M 

M Mon May 16 23:57:33 2011

M  calling db_connect ...

C 

C  DBSDBSLIB : version 700.08, patch 0.024 (Make PL 0.32)

C  MAXDB shared library (dbsdbslib) patchlevels (last 10)

C    (0.024) Default value for max. input variables is 2000 (note 655018)

C    (0.024) Profile parameter to define max. input variables (note 655018)

C    (0.024) Switch SQLMODE after CREATE INDEX SERIAL (note 1267841)

C    (0.024) Input parameters for SQL statements increased (note 655018)

C    (0.018) Create index serial for MaxDB 7.6 (note 1267841)

C    (0.018) More trace in case of packed to string conversion error (note 1262799)

C    (0.016) R3trans export aborts with signal 6 (note 1262245)

C    (0.009) IA64 alignment errors (note 1245982)

C    (0.007) Support DB-Type 'SAP DB' by UPDSTAT (note 1225668)

C 

C 

C  Loading SQLDBC client runtime ...

C  SQLDBC SDK Version : SQLDBC.H  7.6.0    BUILD 007-123-091-175

C  SQLDBC Library Version : libSQLDBC 7.6.5    BUILD 015-123-202-938

C  SQLDBC client runtime is MaxDB 7.6.5.015 CL 202938

C  SQLDBC supports new DECIMAL interface : 0

C  SQLDBC supports VARIABLE INPUT data   : 1

C  SQLDBC supports keepAlive indicator   : 0

C  INFO : SQLOPT= -I 0 -t 0 -S SAPR3

C  Try to connect (DEFAULT) on connection 0 ...

C  *** ERROR => Connect to database failed, rc = -10709 (Connection failed (RTE:Database name is missing))

[dbsdbsql.cpp 137]

B  ***LOG BV3=> severe db error -10709    ; work process is stopped [dbsh#2 @ 1203] [dbsh    1203 ]

B  ***LOG BY2=> sql error -10709 performing CON [dblink#3 @ 431] [dblink  0431 ]

B  ***LOG BY0=> Connection failed (RTE:Database name is missing) [dblink#3 @ 431] [dblink  0431 ]

M  ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c   1449]

M  in_ThErrHandle: 1

M  *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10563]

M 

M  Info for wp 0

M 

M    pid = 212

M    severity = 0

M    status = 0

M    stat = WP_RUN

M    waiting_for = NO_WAITING

M    reqtype = DP_RQ_DIAWP

M    act_reqtype = NO_REQTYPE

M    rq_info = 0

M    tid = -1

M    mode = 255

M    len = -1

M    rq_id = 65535

M    rq_source =

M    last_tid = 0

M    last_mode = 0

M    semaphore = 0

M    act_cs_count = 0

M    csTrack = 0

M    csTrackRwExcl = 0

M    csTrackRwShrd = 0

M    mode_cleaned_counter = 0

M    control_flag = 0

M    int_checked_resource(RFC) = 0

M    ext_checked_resource(RFC) = 0

M    int_checked_resource(HTTP) = 0

M    ext_checked_resource(HTTP) = 0

M    report = >                                        <

M    action = 0

M    tab_name = >                              <

M    attachedVm = no VM

M 

M  *****************************************************************************

M  *

M  *  LOCATION    SAP-Server sirillium1_SED_00 on host sirillium1 (wp 0)

M  *  ERROR       ThInit: db_connect

M  *

M  *  TIME        Mon May 16 23:57:33 2011

M  *  RELEASE     701

M  *  COMPONENT   Taskhandler

M  *  VERSION     1

M  *  RC          13

M  *  MODULE      thxxhead.c

M  *  LINE        10783

M  *  COUNTER     1

M  *

M  *****************************************************************************

M 

M  PfStatDisconnect: disconnect statistics

M  Entering TH_CALLHOOKS

M  ThCallHooks: call hook >BtcCallLgCl< for event BEFORE_DUMP

M  ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP

M  *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   723]

M  *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c  261]

M  Entering ThSetStatError

M  ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)

M  Entering ThReadDetachMode

M  call ThrShutDown (1)...

M  ***LOG Q02=> wp_halt, WPStop (Workproc 0 212) [dpnttool.c   334]

We check several entries on this SDN site, and look for a lot of notes on the marketplace, and they always are related to default user in xuser files, but our xuser list output is ok. We have a DEFAULT connection to SAPSID user, a DBM connection to CONTROL user and a USERDBA connection.

-

XUSER Entry  1

-

Key         :DEFAULT          

Username    :SAPSID                                                         

UsernameUCS2:S.A.P.S.E.D. . . . . . . . . . . . . . . . . . . . . . . . . . .

Password    :?????????

PasswordUCS2:?????????

Dbname      :SID              

Nodename    :server1                                                     

Sqlmode     :SAPR3  

Cachelimit  :-1

Timeout    

Isolation  

Charset     :<unspecified>    

-

XUSER Entry  2

-

Key         :c                

Username    :CONTROL                                                        

UsernameUCS2:C.O.N.T.R.O.L. . . . . . . . . . . . . . . . . . . . . . . . . .

Password    :?????????

PasswordUCS2:?????????

Dbname      :SID              

Nodename    :server1                                                     

Sqlmode     :INTERNAL

Cachelimit  :-1

Timeout     :-1

Isolation   :-1

Charset     :<unspecified>    

-

XUSER Entry  3

-

Key         :c_J2EE           

Username    :CONTROL                                                        

UsernameUCS2:C.O.N.T.R.O.L. . . . . . . . . . . . . . . . . . . . . . . . . .

Password    :?????????

PasswordUCS2:?????????

Dbname      :SID              

Nodename    :server1                                                     

Sqlmode     :SAPR3  

Cachelimit  :-1

Timeout    

Isolation  

Charset     :<unspecified>    

-

XUSER Entry  4

-

Key         :w                

Username    :SUPERDBA                                                       

UsernameUCS2:S.U.P.E.R.D.B.A. . . . . . . . . . . . . . . . . . . . . . . . .

Password    :?????????

PasswordUCS2:?????????

Dbname      :SID              

Nodename    :server1                                                     

Sqlmode     :INTERNAL

Cachelimit  :-1

Timeout     :-1

Isolation   :-1

Charset     :<unspecified>    

Any idea? we are out of ideas at this moment.

Regards

Edited by: Gustavo Goicochea on May 17, 2011 6:37 PM

Hello all,

I am planning to set up max db 7.9 for netweaver as java 7.4 sp1 on window server 2008 r2 with 4gb ram, 400gb hdd.

Can anyone share  the installation steps for max db with hardware and software requirement.

thanks,

mahesh

Hi Gurus,

One of our development systems was recently upgraded to EHP5. We had also completed the upgrade using one sandbox system which is a copy of DEV system.

After the systems were upgraded to EHP5, we are finding that the Program RFCEXEC vanishing from EXE directory. And Because of this, XI connectivity fails. Is this due to the EHP5 upgrade? Please help me in this.

Thanks

Ranga

Hi,

When i try to connect to the content server i get the following error.[Maxdb is on windows 2003 server.]

http://strap1346.crop.trep.org:1090/ContentServer/ContentServer.dll?get&pVersion=0046&contRep=D2&docId=DFF3C5071F5597F1A6CA0017A477046C&accessMode=r

Error:

500 (Internal Server Error)

CreateTab ContentStorage, connect error SQLConnect failed, Specified driver could not be loaded due to system error  193 (MaxDB)., Error Code: 160

Thanks,

Rajiv

Hello,

We had cold system reset after which sap won't start. In startdb.log or when I try to start db manually with dbmcli error message is:

Error! Connection failed to node mynode for database SID:

connection broken

How can debug what's wrong with the db, where to start?

Best Regards,

Sasha

Hello All,

We are running SCM 5.0 on Wintel, livecache version is 7.6 (KERNEL 7.6.02  BUILD 014-123-152-175).

The following short dumps are logged on the test instance. Consistancy checks of livecache have been successful.

Runtime Errors         DBIF_DSQL2_SQL_ERROR

Exception              CX_SY_NATIVE_SQL_ERROR

Short text

    An SQL error occurred when executing Native SQL.

What happened?

    The error 600 occurred in the current database connection "LCA".

How to correct the error

    Database error text........: "POS(1) Work rolled back: BAD_ALLOCATION in

     SAPTS_AGGMULT"

    Database error code........: 600

    Triggering SQL statement...: "EXECUTE PROCEDURE SAPTS_AGGMULT_TIMESERIES"

    Internal call code.........: "[DBDS/NEW DSQL]"

    Please check the entries in the system log (Transaction SM21).

C Mon Aug 04 11:45:07 2008

C  *** ERROR =>   execute() of C_0752, #rec=0, rc=1, rcSQL=600 (POS(1) Work rolled back: BAD_ALLOCATION in SAPTS_AGGMULT)

[dbsdbsql.cpp 1570]

C  *** ERROR => EXECUTE on connection 1, rc=600 (POS(1) Work rolled back: BAD_ALLOCATION in SAPTS_AGGMULT)

[dbdssdb.cpp  2173]

C  sc_p=000000002ABF1DD0,no=752,idc_p=0000000000000000,con=1,act=1,slen=64,smax=256,#vars=0,stmt=000000002B007A30,table=      SAP

C  CALL USER.SAPTS_AGGMULT_TIMESERIES ( ?, ?, ?, ?, ?, ?, ?, ?, ? );

C  *** ERROR => dbdssdb: SQL Error 600, Message: POS(1) Work rolled back: BAD_ALLOCATION in SAPTS_AGGMULT

[dbdssdb.cpp  2403]

B  ***LOG BY2=> sql error 600        performing EXE        [dbds#1 @ 364] [dbds    0364 ]

B  ***LOG BY0=> POS(1) Work rolled back: BAD_ALLOCATION in SAPTS_AGGMULT [dbds#1 @ 364] [dbds    0364 ]

A  TH VERBOSE LEVEL FULL

All assistance will be useful.

Best Regards,

Nisch

Hello,

i have installed a new ERP 6.06 SAP System on MaxDB 7.9/Sles 11 Linux. After successful installation i have tested the database connection.

The database connection failed. What could i do to solve the problem?

SAP transaction DB59 Test:

Result:

p01_P01_02 (p01 )

SAP Kernel Release : 720_EXT_REL

SAP Kernel Patch : 401

DBMRFC Release : 7.9.07.14

DBMCLI Release : 7.9.07.14

DBSL Release : 720.00

DBSL Patch : 421

SQLDBC Version : 7.8.02.17

SQLDBC Runtime : 7.9.07.14

1.DBSL Library Availability -Connection test successful

2.Client Software Availability -Connection test successful

3.Execute an external operating system command (DBMCLI) -Connection test successful

4.Determine status using SQL connection -Error in connection test

5.Test the SQL connection (Native SQL at CON_NAME) -Connection test successful

Report: RSSDBCHECKDBMRFC

  Main Analysis

       SMGW - Checking existence and correctness of registered client

       WARNING: dbmrfc@sapdb not registered. Trying to start the SAPDB_DBM_DAEMON

       SM59 - Checking existence and connection of RFC destinations SAPDB_DBM and SAPDB_DBM_DAEMON

       SAPDB_DBM exists

       SAPDB_DBM_DAEMON exists

       SAPDB_DBM connection successful

       WARNING: SAPDB_DBM_DAEMON connection not successful. Trying to start SAPDB_DBM_DAEMON

       SM59 - Checks were successful

       CONN - Determining database state via TCP/IP connection SAPDB_DBM and SAPDB_DBM_DAEMON

  DBM_EXECUTE_SDB error: dbm_execute_error

  Name and Server     : P01 - p01

  Function            : DBM_EXECUTE

  Command             : db_state

  Error               : DBM Error

  Return Code         : -24941

  Error Message       : ERR_NEEDLOGON: DBM server logon required

  ERR

  -24941,ERR_NEEDLOGON: DBM server logon required

       ERROR: Error in determination via command mode "dbmrfc db_state"

  DBM_EXECUTE_SDB: dbm_execute_error

  Name and Server     : P01 - p01

  Function            : DBM_EXECUTE

  Command             : db_state

  Error               : DBM Error

  Return Code         : -24941

  Error Message       : ERR_NEEDLOGON: DBM server logon required

  ERR

  -24941,ERR_NEEDLOGON: DBM server logon required

       ERROR: Error in determination via session mode "dbmrfc db_state"

       CONN - Check was not successful

       TP - Get connection information and existence of program

       Connection information used by DBMRFC:

       dbnode: p01 ; dbname: P01 ; sysid: P01 ; conn: P01 ; profile: no_longer_used

       Transport profile is not specified, trying to determine it

       ERROR in TMS_CFG_READ_LOCAL_CONFIG:  tms_is_not_configured

       ERROR in TMS_CFG_READ_LOCAL_CONFIG: Could not get transport domain.

       Executing command: dbmcli -d P01 -n p01 -tpp no_longer_used -tpi P01 -tpc P01 db_state

       TP - Checks were successful

Detail Analysis

       Checking MAXDB Version and searching independent program path via SDBREGVIEW

       Independent program path exists: /sapdb/programs

       Client installation path exists: /sapdb/clients/P01

       Checking paths in environment variables

       Checking correctness of environment variable "path"

       /sapdb/programs/bin  exists

       ERROR: Set the following path before all other paths in environment variable: /sapdb/clients/P01/bin

       /usr/sap/P01/DVEBMGS02/exe (DIR_EXECUTABLE) exists

       Checking correctness of environment variable "ld_library_path"

       /usr/sap/P01/DVEBMGS02/exe (DIR_EXECUTABLE) exists

       ERROR: Set the following path before all other paths in environment variable: /sapdb/programs/lib

       ERROR: Set the following path before all other paths in environment variable: /sapdb/clients/P01/lib

       Error found in one step

       Checking existence of necessary libraries in /sapdb/programs/lib

       libicudata.so.<version> exists

       libicui18n.so.<version> exists

       libicuuc.so.<version> exists

       libsapni.so exists

       WARNING: libsapu16.so was not found

       Check your MAXDB installation

       Checking existence of necessary executables

       tp exists in /usr/sap/P01/DVEBMGS02/exe

       sapdbmrfc exists in /usr/sap/P01/DVEBMGS02/exe

       dbmrfc exists in /sapdb/programs/bin

       sdbregview exists in /sapdb/programs/bin

       sdbverify exists in /sapdb/programs/bin

       dbmcli exists in /sapdb/programs/bin

Xuser test on OS:

p01:p01adm 57> dbmcli -U c

dbmcli on p01 : P01>exit

OK

---

p01:p01adm 58> dbmcli -U w

dbmcli on p01 : P01>exit

OK

---

p01:p01adm 59> dbmcli -d P01 -u control,<password>

dbmcli on P01>exit

OK

---

p01:p01adm 59> dbmcli -d P01 -u superdba,<password>

dbmcli on P01>exit

OK

---

p01:p01adm 61> R3trans -d

This is R3trans version 6.23 (release 720 - 31.10.12 - 20:12:06).

unicode enabled version

R3trans finished (0000).

p01:p01adm 62> R3trans -x

This is R3trans version 6.23 (release 720 - 31.10.12 - 20:12:06).

unicode enabled version

R3trans finished (0000).

p01:p01adm 63>

p01:p01adm 58> dbmcli -d P01 -U c db_enum

OK

P01     /sapdb/P01/db                           7.9.07.14       fast    running

P01     /sapdb/P01/db                           7.9.07.14       quick   offline

P01     /sapdb/P01/db                           7.9.07.14       slow    offline

P01     /sapdb/P01/db                           7.9.07.14       test    offline

p01:p01adm 59>

p01:p01adm 60> x_server start

2013-10-19 12:17:28 30139 44640 INF  12916          Found running XServer on port 7200

2013-10-19 12:17:28 30139 44640 INF  13011            version 'U64/LIX86 7.9.07   Build 014-123-244-287'

2013-10-19 12:17:28 30139 44640 INF  13010            installation P01  - path: /sapdb/P01/db

2013-10-19 12:17:28 30141 86336 ERR  11931 XSERVER  Open update pipe '/sapdb/data/fifo/xserver_p01_update' failed:No such file or directory

2013-10-19 12:17:28 30141 86336 INF  12916          Found running sdbgloballistener on port 7210

2013-10-19 12:17:28 30141 86336 INF  13011            version 'UNKNOWN'

2013-10-19 12:17:28 30141 86336 ERR  11941 XSERVER  Version string conversion failed:expected format %-9.9s %-8.8s Build %-3.3s-%-11.11s

p01:p01adm 60>

p01:p01adm 60> cd /sapdb/data/fifo/

p01:p01adm 61> ls -altr

total 8

drwxrwxr-x 12 sdb sdba 4096 Oct 18 18:30 ..

prw-rw----  1 sdb sdba    0 Oct 19 12:05 xserver_p01_7200_logger

prw--w--w-  1 sdb sdba    0 Oct 19 12:05 P01

prw-rw----  1 sdb sdba    0 Oct 19 12:17 xserver_p01_7200_update

drwxrwxr-x  2 sdb sdba 4096 Oct 19 12:17 .

p01:p01adm 62>

There´s no entry with "xserver_p01_update"

How can i create this entry?

I have no idea to solved this problem. Who can help?

Best regards

Dennis

Hi guru,

Recently we are facing some backup issues with backup tool COMMVAULT backing up database MAXDB. This problem is really strange as it happens intermittent. Below is the log that i found and suspect it could be due to security issue. Has any one face such problem before? Really appreciate your help. Thank you.

2010-01-05 10:20:05 0x00002328              0 DBM      command backup_start BackLog LOG AUTOIGNORE

2010-01-05 10:20:06 0x00002328 ERR     -24920 DBM      ERR_BACKUPOP: backup operation was unsuccessful

                    0x00002328 ERR     -24920 DBM      The database was unable to fulfill a request (-903, Host file I/O error,access denied [5]).

2010-01-05 14:00:05 0x000033bc              0 DBM      command backup_start BackPages1 RECOVERY PAGES AUTOIGNORE

2010-01-06 10:20:05 0x000010e4              0 DBM      command backup_start BackLog LOG AUTOIGNORE

2010-01-06 10:20:59 0x000010e4 ERR     -24920 DBM      ERR_BACKUPOP: backup operation was unsuccessful

                    0x000010e4 ERR     -24920 DBM      The database was unable to fulfill a request (-903, Host file I/O error,access denied [5]).

2010-01-06 14:00:04 0x000014a4              0 DBM      command backup_start BackPages1 RECOVERY PAGES AUTOIGNORE

2010-01-07 10:20:04 0x00000720              0 DBM      command backup_start BackLog LOG AUTOIGNORE

2010-01-07 10:20:52 0x00000720 ERR     -24920 DBM      ERR_BACKUPOP: backup operation was unsuccessful

                    0x00000720 ERR     -24920 DBM      The database was unable to fulfill a request (-903, Host file I/O error,access denied [5]).

Regards,

Kent