Hi,

I installed the content server and maxdb.

1- After install of content server and maxdb, how do I find out the maxdb is running or not?

2- Is there a command to check status of maxdb instance and name of database of maxdb?

3- How do I start maxdb with dbmcli?

4- What is the parameter file of maxdb and it's location (just like Oracle has a parameter file init.ora)?

Thanks,

haleem

Hi,

on 7.7  on Win 2008 , 64 bits,server

I have created a medium which is on a mapped drive.

Other applications can write on this mapped drive.

But MAXDB backup fails with :

Error: Could not open stream(-903)

Thanks for help.

Hello,

i'd like to limit a sentence of sql  :

select * from gp limit 0,10

This is not possible in Maxdb. Please ¿ Is there any solution for Maxdb ?

thanks,

My regards,

Hi all, I am trying for to perform a SAP DB upgrade from 7.3.0.28 to version 7.5.0.21. My problem is that when I execute command SDBUPD the following messages appear on screen almost immediately and the update is terminated:

beginning to check sap db instances

start new instance update

cannot establish database instance session

I followed the instructions in the upgrade guide and notes mentioned but this issue is nowhere mentioned. I am not a database specialist so any help and/or suggestions are more then welcome.

Thanks in advance, Tiest

hello

I installed a new permanent license on the system on ERP6 running MAXDB 7.7.04 28 and all was working well until i stopsap and rebooted the system.I am  now getting an error  Login in failed check license key

i logged on as SAP* and checked trxn slicense the license shows that its installed but when i looked under the section Licenses in the database its empty .It looks like the database is not checking the license.

if i try to install a temporary license  it says rc of SsfEncode: 11 = SSF_API_ENCODE_FAILED = ASN.1 encodin

Any ideas to fix this problem will be welcome as users cannot log in now.

Hello All,

We are running SCM 5.0 on Wintel, livecache version is 7.6 (KERNEL 7.6.02  BUILD 014-123-152-175).

The following short dumps are logged on the test instance. Consistancy checks of livecache have been successful.

Runtime Errors         DBIF_DSQL2_SQL_ERROR

Exception              CX_SY_NATIVE_SQL_ERROR

Short text

    An SQL error occurred when executing Native SQL.

What happened?

    The error 600 occurred in the current database connection "LCA".

How to correct the error

    Database error text........: "POS(1) Work rolled back: BAD_ALLOCATION in

     SAPTS_AGGMULT"

    Database error code........: 600

    Triggering SQL statement...: "EXECUTE PROCEDURE SAPTS_AGGMULT_TIMESERIES"

    Internal call code.........: "[DBDS/NEW DSQL]"

    Please check the entries in the system log (Transaction SM21).

C Mon Aug 04 11:45:07 2008

C  *** ERROR =>   execute() of C_0752, #rec=0, rc=1, rcSQL=600 (POS(1) Work rolled back: BAD_ALLOCATION in SAPTS_AGGMULT)

[dbsdbsql.cpp 1570]

C  *** ERROR => EXECUTE on connection 1, rc=600 (POS(1) Work rolled back: BAD_ALLOCATION in SAPTS_AGGMULT)

[dbdssdb.cpp  2173]

C  sc_p=000000002ABF1DD0,no=752,idc_p=0000000000000000,con=1,act=1,slen=64,smax=256,#vars=0,stmt=000000002B007A30,table=      SAP

C  CALL USER.SAPTS_AGGMULT_TIMESERIES ( ?, ?, ?, ?, ?, ?, ?, ?, ? );

C  *** ERROR => dbdssdb: SQL Error 600, Message: POS(1) Work rolled back: BAD_ALLOCATION in SAPTS_AGGMULT

[dbdssdb.cpp  2403]

B  ***LOG BY2=> sql error 600        performing EXE        [dbds#1 @ 364] [dbds    0364 ]

B  ***LOG BY0=> POS(1) Work rolled back: BAD_ALLOCATION in SAPTS_AGGMULT [dbds#1 @ 364] [dbds    0364 ]

A  TH VERBOSE LEVEL FULL

All assistance will be useful.

Best Regards,

Nisch

I folks,

I use a 32 bits IDE witch connect to MaxDB using ODBC, so i need the 32 bit driver to create a 32 bits ODBC datasource.

Everything was OK, until ia receive a brand new computer, running... Windows 7 64 bits.

When i try to install MaxDb client (7.6.06.22), i have this message:

Cannot create package tree: unresolved dependency: package "Database connectivity" not found.

I've also tried version 7.8.02.21, and i get another message:

Software isn't runnable on your system.

What must i do ?

TIA

Frédéric.

Dear DMS experts,

I need to know how many documents are inside of a MAX DB datase 7.6. Is there any command  that indicates the number of different documents stored in Content server .

Thanks,

Chandu

Hello to ALL;

this post is addressed to ALL MAXDB-GURU's !!

I'v few questions to MAXDB Performance-Guy's for R3load Export on MAXDB!

(remark to my person:

I'm certified OS/DB migration consultant and have already done over 500 OS/DB migrations since 1995 successfully)

BUT now I'm face with following setup for Export:

HP- IA64 BL870c,  4 CPUu2019s Dual-Core + Hyperthreading activ (mean's 16 "CPU'S" shown via top or glance)

64 GB RAM, HPUX V11.31;

MAXDB  7.7.07

ECC 5.0; Basis/Aba 640.22

SAP-Kernel 640-Unicode Patch 381

8 sapdatas are configured on unique 200GB LUN's and VG's in HP-UX; on storage-side the 8 220GB LUN's are located on (only) 9 300GB-Disks with Raid-5 Level and within HP-UX each VG/LVOL is mirrored via LVM to a second desasterdatacenter (200m distance)

LOGFILES:

2 x 4 GB LUN Raid-1 on Storage and via LVM  also mirrored to failover-center

MAXDB-Datasize: 1600 GB Overall and within this 1350 GB used, TEMPUsage about 25 GB !

MAXDB-Parameter-Settings

MAXCPUu2019s 10  (4 x IA64 QuadCore+Hyperthreading shows 16 Cores within top and galcne

)

Cache_SIZE= I/O Buffer Cache = 16 GB (2.000.000 Pages)

Data-Cache-HitRatio:  99.61%

Undo-Cache = 99,98%

the following sapnote for MAXDB Peformance and Migrations are well known and already processes

928037, 1077887, 1385089, 1327874, 954268, 1464560, 869267,

My major problem is the export-runtime with over 4 days on the first dry-run (6 R3load's running on Linux-APPL-Server), and 46h on second runtime, 6 R3loads running on DB-Server IA64)

the third trail-run was aborted by me after 48hours and 50% export-dump-space was written. In all 3 dry-runs, no more than approx 3.5GB DUMP-Space were written per hour!

My first question to all MAXDB-Guru'S: How can I influence/optimize the TEMP - Area in MAXDB?? I didn't find any hint's in SDN or SAPNOTES or MaxDB Wiki or google....As fare as I know, this TEMP area "resides" within MAXDB-datafiles, thus it's seperated on my 48 datafiles, spreaded over 8 LUN/VG/disks. But I see LESS throughput on disk's and MAXDB-Kernel uses only ONE of ten's cpu-cores (approx 80% - 120% of 1000%).

The throughput or cpu-usage doesn't change when I use 2 or 4 or 10 or 16 R3load' processes in parallel. The "result" is always the same: approx. 3,5 GB Export-Dump and 1 CPU MAX-DB Kernelprocess is used !

so the BIG Question for me: WHERE is the bottleneck ?? (RAID-5 Disk-LUNS mirrored with LVM ???)

on HP-UX scsi_queue_depth_length I'v increased default value from 8 to 32 to 64 to 128 --> no impact

2nd question:

I'v read  OS-Note 1327874 - FAQ: SAP MaxDB Read Ahead/Prefetch, and we are running MAXDB 7.7.07.19! (MaxDB 7.8 is not suppored via PAM for IA64 640-UC-Kernel) and as far as I understood, this parameter will no HELP me on EXPORT with primary-key-sequence ! is this correct?  THUS: which parameter HELPS for speeding up Export-Runtime?

MAXCPU is set to 10, but ONLY 1 of them is used??

so this post is for ALL MAXDB GURU'S!

who will be intrested to contriubte on this "high-sophisticated" migration-project with 1.5TB MAXDB-Database-size and ONLY 24h Downtime !!

all tips and hints are welcome and I will give us coninued updates to this running project until WE did a successfull migration job.

PS: Import is not yet started, but should be done within vSphere 5 and SLES 11 SP1 on MAXDB 7.8 ....and of yours in parallel to export with migration monitor, BUT again a challenge: 200km distance from source to traget system !!!

NICE PROJECT;

best regards Alfred

Dear Concern,

Please help me.

I have recently created a Content Repository in OAC0. When I tested the Connection,

I got error i.e. http error 401 unauthorized

So I login into CSADMIN, there i got new error

HTTP error: 500 Business Server Page Error in CSADMIN.

Please help me resolving this issue.

My SAP is SAP r/3 4.7

Hi,

we have the problem to start our MaxDB anymore. We get the following error message:

af4lm139:sm2adm 93> dbmcli -d SM2 -u control,tsyst001 db_warm

ERR

-24988,ERR_SQL: SQL error

-902,I/O error

3,Database state: OFFLINE

Internal errorcode, Error code 9050 "disk_not_accessible"

20017,RestartFilesystem failed with 'I/O error'

Content of the knldiag:

Thread          - Task      -  2012-01-19 14:33:31     MsgOutput     27:  --- Starting GMT 2012-01-19 13:33:31           7.8.02   Build 026-121-243-456

Thread      0x61C Task    120  2012-01-19 14:34:11     AdminMsg       0:  4F181BD30004 0000   RST RESTART

Thread      0x61C Task    120  2012-01-19 14:34:11 ERR RTEIO         12:  Attach volume DATA_VOLUME_0028 failed during open,_FILE=RTEIO_VolumeInfo-k+noPIC.cpp,_LINE=1766

                               2012-01-19 14:34:11 ERR RTEIO          1:  Open file /sapdb/SM2/sapdata1/DISKD0028 failed, open(READWRITE,OPEN_EXISTING) returned 'No such file or directory' (2),_FILE=RTEIO_VolumeInfo-k+noPIC.cpp,_LINE=2404

Thread      0x61C Task    120  2012-01-19 14:34:11 ERR Admin          3:  Database state: OFFLINE,_FILE=Kernel_Administration+noPIC.cpp,_LINE=815

                               2012-01-19 14:34:11     KernelComm     6:  Internal errorcode, Error code 9050 "disk_not_accessible"

                               2012-01-19 14:34:11 ERR Admin      20017:  RestartFilesystem failed with 'I/O error',_FILE=Kernel_Administration+noPIC.cpp,_LINE=435

Thread      0x5FC Task      -  2012-01-19 14:34:11 ERR Messages       7:  Begin of dump of registered messages,_FILE=Msg_Registry+noPIC.cpp,_LINE=507

Thread      0x5FC Task      -  2012-01-19 14:34:11     KernelComm     6:  Internal errorcode, Error code 9050 "disk_not_accessible"

Thread      0x5FC Task      -  2012-01-19 14:34:11 ERR Admin          3:  Database state: OFFLINE,_FILE=Kernel_Administration+noPIC.cpp,_LINE=815

                               2012-01-19 14:34:11     KernelComm     6:  Internal errorcode, Error code 9050 "disk_not_accessible"

                               2012-01-19 14:34:11 ERR Admin      20017:  RestartFilesystem failed with 'I/O error',_FILE=Kernel_Administration+noPIC.cpp,_LINE=435

Thread      0x5FC Task      -  2012-01-19 14:34:11 ERR Messages       8:  End of the message list registry dump,_FILE=Msg_Registry+noPIC.cpp,_LINE=544

Thread      0x5F5 Task      -  2012-01-19 14:34:12 ERR RTEKernel    102:  Kernel exited without core and exit status 0x200,_FILE=RTEKernel_Termination+noPIC.cpp,_LINE=683

Thread      0x5F5 Task      -  2012-01-19 14:34:12 ERR RTEKernel    106:  Kernel exited with exit code 0x2,_FILE=RTEKernel_Termination+noPIC.cpp,_LINE=761

Thread      0x5F5 Task      -  2012-01-19 14:34:12     MsgOutput     28:  ___ Stopping GMT 2012-01-19 13:34:12           7.8.02   Build 026-121-243-456

We tried to add a volume in offline mode of the database.

Has someone an idea how to solve this issue?

Thanks in advance for your help!

Kind regards,

Joern

Log is full in our DEV server.  Everytime I do a log backup, the DB turns offline.

How do I resolve this.

Thanks.

We are getting " liveCache lock server is not installed " error when we are scheduling a background job for programme:  SLCA_LCK_SYNCHOWNERS.  Any help is appreciated.

thx

Jeff

This is a new installation on Windows 2003 x64 / MSSQL 2005.

SCM and LiveCache running on the same server.

The problem occured initially in transaction LC10, selecting the

database connection LCA and clicking livecache:monitoring end with a

timeout error:

Name and Server : SLQ - pmichsapbw56

DBMRFC Function : DBM_CONNECT

Error : Connect timeout

Error Message : Could not connect within 25 seconds

The configuration of passwords has been checked on the livecache DB by

connecting with database manager.

Going to transaction DB59 for connection test. the DBMRFC server is

started and the connection test gives the following result:

1. Connect. test with "dbmcli db_state"

Successful

2. Connect. test with command mode "dbmrfc db_state"

Successful

3. Connect. test with session mode "dbmrfc db_state"

Unsuccessful

dbm_system_error

Name and Server : SLQ - pmichsapbw56

DBMRFC Function : DBM_CONNECT

Error : Connect timeout

Error Message : Could not connect within 25 seconds

4. Connect. test with "native SQL" ( LCA )

Successful

If DBMRFC server is restarted, testing the RFC SAPDB_DBM_DAEMON from

transaction SM59 is working correctly.

Then I tried again the test of connection LCA from DB59 and it fails.

I did the same test restarting DBMRFC server with trace (from

transaction db59).

Here is the trace from dev_rfc.trc:

• ERROR file opened at 20080725 165905 W. Europe Dayli, SAP-REL 700,0,9 RFC-VER 3 756683 MT-SL

T:15320 ======> CPIC-CALL: 'SAP_CMACCPTP'

LOCATION    CPIC (TCP/IP) on local host with Unicode

ERROR       illegal parameter value ( function=SAP_CMACCPTP /

            parameter=handle / value=1844 )

TIME        Fri Jul 25 16:59:05 2008

RELEASE     700

COMPONENT   CPIC (TCP/IP) with Unicode

VERSION     3

RC          769

MODULE      r3cpic.c

LINE        9449

COUNTER     7

T:15320 Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1737

T:15320 ---> RFC MESSAGE/ERROR : 104

• RFC_ERROR_SYSTEM_FAILURE

• CPIC-CALL: 'SAP_CMACCPTP'

LOCATION    CPIC (TCP/IP) on local host with Unicode

ERROR       illegal parameter value ( function=SAP_CMACCPTP /

            parameter=handle / value=1844 )

TIME        Fri Jul 25 16:59:05 2008

RELEASE     700

COMPONENT   CPIC (TCP/IP) with Unicode

VERSION     3

RC          769

MODULE      r3cpic.c

LINE        9449

COUNTER     7

T:15320 <* RfcDispatch Problem connecting to livecache after installing SCM 5.1 : returns 1:RFC_FAILURE

• ERROR file opened at 20080725 165933 W. Europe Dayli, SAP-REL 700,0,9 RFC-VER 3 756683 MT-SL

T:14772 ======> CPIC-CALL: 'SAP_CMACCPTP'

LOCATION    CPIC (TCP/IP) on local host with Unicode

ERROR       illegal parameter value ( function=SAP_CMACCPTP /

            parameter=handle / value=1848 )

TIME        Fri Jul 25 16:59:33 2008

RELEASE     700

COMPONENT   CPIC (TCP/IP) with Unicode

VERSION     3

RC          769

MODULE      r3cpic.c

LINE        9449

COUNTER     9

T:14772 Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1737

T:14772 <* RfcDispatch Problem connecting to livecache after installing SCM 5.1 : returns 1:RFC_FAILURE

here is the trace from dev_rfc0:

• Trace file opened at 20080725 165913 W. Europe Daylight Time, SAP-REL 700,0,133 RFC-VER U 3 938770 MT-SL

======> CPIC-CALL: 'ThSAPCMRCV' : cmRc=17 thRc=474

Connection deleted by administrator                                     

ABAP Programm: SAPLSADC (Transaction: )

Called function module: DBM_CONNECT

User: SBARRAUD (Client: 000)

Destination: SAPDB_DBM_DAEMON (handle: 2, 06522294, {2D5A5ADD-E47B-F1F9-83F5-001E0BE9FFAA})

SERVER> RFC Server Session (handle: 1, 06521294, {2D5A5ADD-992F-F152-83F5-001E0BE9FFAA})

SERVER> Caller host:

SERVER> Caller transaction code: DB59 (Caller Program: SAPLSADC)

SERVER> Called function module: DBM_CONNECT_PUR

Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 3295

CPIC-CALL: 'ThSAPCMRCV' : cmRc=17 thRc=474

Connection deleted by administrator                                     

Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1817

Here is the version of what has been installed:

Configuration:

SAP_BASIS 700 0014 SAPKB70014 SAP Basis Component

SAP_ABA 700 0014 SAPKA70014 Cross-Application

Component

ST-PI 2005_1_700 0006 SAPKITLQI6 SAP Solution

Tools Plug-In

PI_BASIS 2006_1_700 0004 SAPKIPYM04 Basis Plug-In

(PI_BASIS) 2006_1_700

SAP_BW 700 0016 SAPKW70016 SAP NetWeaver BI 7.0

SAP_AP 700 0012 SAPKNA7012 SAP Application

Platform 7.00

LCAPPS 2006_700 0004 SAPK-70004INLCAPPS LC

Applications 2006_700

EA-IPPE 400 0008 SAPKGPID08 SAP iPPE (EA-IPPE) 400

SCEMSRV 510 0006 SAPK-51006INSCEMSRV SCEMSRV 5.1

SCM 510 0005 SAPKY51005 Supply Chain Management

5.1

SCMBPLUS 510 0005 SAPK-51005INSCMBPLUS SCM Basis PLUS

5.1

SCMEWM 510 0005 SAPK-51005INSCMEWM Extended

Warehouse Management 5.1

SCMSNC 510 0005 SAPK-51005INSCMSNC SCMSNC 5.1

SCM_BASIS 510 0008 SAPK-51008INSCMBASIS SCM Basis 5.1

QIE 200 0005 SAPK-20005INQIE Quality Inspection

Engine 2.00

BI_CONT 703 0006 SAPKIBIIP6 Business Intelligence

Content

ST-A/PI 01K_SCM500 0000 - Application

Servicetools for SCM 500/510

LCA database connection definition:

-

-

-

-

|pmichsapbw56_SCQ_00|pmichsapbw56| |7.7.02.08

|7.7.02.08 |700_REL |133 |700.08 |133

Thanks in advance for you help.

Stéphane Barraud.

Hello,

while a full database backup the disk got full

and the backup respond

Error code 28 (No space left on device)

##############################

/sapdb/programs/bin/dbmcli -d SM4 -u SUPERDBA,PASSWORD -i /sapdb_backups/backup_scripte/full_backup.txt -t /sapdb_backups/backup_scripte/start_full_backup.log

+++ Sun May  5 16:07:02 2013

Connection established to node (local) for database SM4

*** Sun May  5 16:07:02 2013

db_connect

---

OK

*** Sun May  5 19:31:57 2013

backup_start SM4_Full_Backup

---

ERR

-24988,ERR_SQL: SQL error

-903,Host file I/O error

3,Data backup failed

136,transfer of block 4294967295 to medium /sapdb_backups/full_backups/SM4_Full_Backup.bak failed

operation   : write

block size  : 8192 bytes

length      : 8 blocks

offset      : 4294967295 blocks

position    : 35184372088832 bytes

Servertask Info: because Error in backup task occured

Job 1 (Backup / Restore Medium Task) [executing] WaitingT145 Result=3700

Error in backup task occured, Error code 3700 "hostfile_error"

125,Write error on medium /sapdb_backups/full_backups/SM4_Full_Backup.bak: Error code 28 (No space left on device)

###############################################

"df -h" reports

###############################################

Filesystem            Size  Used Avail Use% Mounted on

/dev/sda1             473G  306G  144G  69% /

devtmpfs               24G  136K   24G   1% /dev

tmpfs                 5.9G   20K  5.9G   1% /dev/shm

/dev/sdb1              99G   94G     0 100% /sapdb_backups

/dev/sdc1              79G   70G  5.1G  94% /sapdata1

/dev/sdd1              99G   86G  8.4G  92% /sapdata2

/dev/sde1              16G  8.0G  7.0G  54% /saplog1

###############################################

when I delete the corrupt backup file "rm -frv /sapdb_backups/full_backups/SM4_Full_Backup.bak"

the space on device /dev/sdb1 (/sapdb_backups) is still full.

"du -h /sapdb_backups/" show only 64M space usage.

###############################################

4.0K    /sapdb_backups/lost+found

4.0K    /sapdb_backups/wdf_itfs01

63M     /sapdb_backups/media

68K     /sapdb_backups/backup_scripte

4.0K    /sapdb_backups/log_backups

4.0K    /sapdb_backups/full_backups

63M     /sapdb_backups/

###############################################

"lsof | grep -i sapdb_backups" shows that

the kernel process of the maxdb holds the backup file ("SM4_Full_Backup.bak")

###############################################

lsof | grep -i sapdb_backups

kernel     8859        sdb  544w      REG               8,17 99959234560    6217730 /sapdb_backups/full_backups/SM4_Full_Backup.bak (deleted)

bash      13372       root  cwd       DIR               8,17        4096    6217729 /sapdb_backups/full_backups

lsof      13474       root  cwd       DIR               8,17        4096    6217729 /sapdb_backups/full_backups

grep      13475       root  cwd       DIR               8,17        4096    6217729 /sapdb_backups/full_backups

lsof      13476       root  cwd       DIR               8,17        4096    6217729 /sapdb_backups/full_backups

###############################################

this is an productive system, so I can`t stop the maxdb or SAP system and cannot kill the process.

Is there a solution to close the file ?

Best regards

Alex

Hello experts,

We are doing our SCM upgrade from 4.1 to 7.0 with migration. We have completed with the upgrade but before doing the LC upgrade we need to upload the data to the LC using the  /SAPAPO/OM_LC_UPGRADE_70, while doing this it gives an error for connectivity to the LC. From DB59, i checked the connection test fails for "Native SQL" (LCA) step.

+1. Connect. test with "dbmcli db_state"                         Successful+
+2. Connect. test with command mode "dbmrfc db_state"            Successful+
+3. Connect. test with session mode "dbmrfc db_state"            Successful+
+4. Connect. test with "native SQL"  ( LCA )                     No connection+   +SQL Code:+   +Error creating a secondary database connection+   +Set up of a secondary connection to the database system failed. It is possible that the data required for setting up the con+   +SQL code:+   +For detailed information, see the developer trace for work process:            4+

From the workprocess we get the below error

B  Loading DB library '/usr/sap/EAD/DVEBMGS59/exe/dbsdbslib.o' ...
M  *** ERROR => DlLoadLib()==DLENOACCESS - dlopen("/usr/sap/EAD/DVEBMGS59/exe/dbsdbslib.o") FAILED  "#0509-130 Symbol resolution failed for /usr/sap/EAD/DVEBMGS59/exe/dbsdbslib.o because:
#0509-136   Symbol getData__Q2_6SQLDBC10SQLDBC_LOBFPvPLLT3T1T3T2b (number 197) is not exported from
##   dependen"  (errno=8,Exec format error) [dlux.c       445]
M  {root-id=4D87070E166501B0E1008002A7E41451}_{conn-id=00000000000000000000000000000000}_0
B  *** ERROR => Couldn't load library '/usr/sap/EAD/DVEBMGS59/exe/dbsdbslib.o'
 [dbcon.c      5263]
B  {root-id=4D87070E166501B0E1008002A7E41451}_{conn-id=00000000000000000000000000000000}_0
B  ***LOG BYG=> could not load library for database connection LCA        [dbds         886]

We have upgrade the sap kernel and also the above said dbsl library, and it exists in the exe directory, But still nothing seems to work...

Can someone give any ideas ??

Thx

Ananth

Hi,

I have installed SAP Netweaver developer Studio 6.40 which installed MAXDB database also. Due to some reason I had to unistall the trial version of Developer studio, in this process developer studio got unistalled but not MAXDB.

*----

I use Add/Remove programs and uninstall MaxDB. I get the messages like this.....

Start uninstallation now (y/n) : Y (resoponse)

then message displays

found instance of J2E, cannot remove package..first remove all instances...

*----

I have stopped all the services, even then Iam getting such error message. How do I uninstall?

Help needed.

-Suresh

Greetings,

We are having a problem with SAPDB that I am not able to solve.  We restored a full backup from another server, and after installing it, I managed to bring it online (after some trouble, we ran into some bugs in our particular version of DBMGUI).  I can log into both SQL and DBM, but the DBA user was missing after restore (in DBMGUI, it's registered in the SQL).  I created the SUPERDBA user, intending it to be the DBA user, but it doesn't show up anything special in DBMCLI.  When I log into the SQLStudio and do a check on the users with SELECT * FROM DOMAIN.USERS, SUPERDBA does show up as having SYSDBA mode.

When trying to do a load_systab from DBMCLI, however, it gives the error: -24908 Wrong SYSDBA.

That's great, since there is no other SYSDBA.  The DB Engine is 7.4.3.19  Yes, I am aware that it isn't supported, but that doesn't mean it shouldn't work   We have to use 7.4 for this project, otherwise I would gladly use 7.7. 

(And yes, we are an SAP customer, and I have already put in an OSS note, but I prefer the forum if possible so everyone can see the answer).

Also in the log we get:

ERR_DBAWRONG: wrong SYSDBA

I checked in the help for MaxDB and there is a command (something like conf_sysdba) to change the sysdba user - but that only works on 7.6 or newer.  How can we force it to recognize the SYSDBA user on 7.4.3.x?

(Also, I have seen some mysterious commands changing config settings like SAPDB12, but is this stuff documented anywhere).

Thank you very much,

                 Noah Silva

while starting livecache, getting the following message

Operating system is AIX

The liveCache state is OFFLINE

DBMServer 7.7.04   Build 037-123-218-794

Starting SID into ADMIN

ERR

-24994,ERR_RTE: Runtime environment error

20090,Check knldiag! Kernel exited with '1' before reaching ADMIN state

ERROR : liveCache SID not started

-

Please help needful

We are getting " liveCache lock server is not installed " error when we are scheduling a background job for programme:  SLCA_LCK_SYNCHOWNERS.  Any help is appreciated.

thx

Jeff